hpr3768 :: Jeep Ignition Repair
Replacing ignition on my 1999 Jeep Wrangler
Hosted by Stache_AF on Wednesday, 2023-01-11 is flagged as Clean and is released under a CC-BY-SA license.
cars, repairs.
1.
The show is available on the Internet Archive at: https://archive.org/details/hpr3768
Listen in ogg,
spx,
or mp3 format. Play now:
Duration: 00:10:31
general.
I should have started by removing these two screws
Click the thumbnail to see the full-sized image
But I actually started with two of these screws, removed the knee board, then removed the third screw
Click the thumbnail to see the full-sized image
I removed the ignition assembly by removing these three screws. There is a large bump on the bottom, this is where the spring that lifts the ignition locking mechanism goes
Click the thumbnail to see the full-sized image
Click the thumbnail to see the full-sized image
The piece of ignition that had broken
Click the thumbnail to see the full-sized image
Replacement part. The marked part is very delicate and will snap easily