Site Map - skip to main content

Hacker Public Radio

Your ideas, projects, opinions - podcasted.

New episodes every weekday Monday through Friday.
This page was generated by The HPR Robot at

hpr1690 :: Arduino 101 Breadboard

learn how to use a breadboard.

<< First, < Previous, , Latest >>

Hosted by Klaatu on Friday, 2015-01-23 is flagged as Clean and is released under a CC-BY-SA license.
Arduino. 3.
The show is available on the Internet Archive at: https://archive.org/details/hpr1690

Listen in ogg, spx, or mp3 format. Play now:

Duration: 00:28:20

Arduino and related devices.

In this series various contributors talk about how to use and program Arduino single-board microcontrollers and related devices.
See the Wikipedia article https://en.wikipedia.org/wiki/List_of_Arduino_boards_and_compatible_systems for details of the range of devices.

In this two-part series, Klaatu introduces you to the Arduino. First, learn about the breadboard and how to make electricity course through it in order to power your very own simple circuit.

To follow along with what Klaatu is talking about, refer to these two graphics:

And here are diagrams of the simple circuits that Klaatu constructs.

image: a diagram of the simplest circuit in todays show

image: a diagram of the switched circuit in todays show

Comments

Subscribe to the comments RSS feed.

Comment #1 posted on 2015-01-23 07:07:11 by Mike Ray

3v3

Good show. Beat me to it...I have show notes for three shows about Arduino, just need to do the recordings.

Just a note about 3v3 on the Arduino board. This is not a typo; it is common practice in electronics to replace the decimal point with the unit. So 3v3 is 3.3 volts, 2n2 stamped on a capactor or on a circuit diagram is 2.2 nano-Farads and 4k7 against a resistor on a circuit diagram is 4.7 kilohms.

My Arduino shows were going to be about the command-line tools available for programming.

I will wait and see what your next show(s) contain so I don't duplicate your great efforts

Comment #2 posted on 2015-01-23 16:21:26 by Tcuc

Nice, great quality :-)

Thanks for a good quality episode! I'm studying electronics, and of like to say that this is very accurate ;-) and if you want to discuss terminology, please ask. I love to talk about electronics :-D

Comment #3 posted on 2015-03-20 06:05:44 by Mirwi

Great show!

Heavily catching up, just listened yesterday.

Loved it. It was entertaining to listen to you doing every single step and seeing you do it before my minds eye. I'd never thought about describing it in such detail, but you have a point there. Surely there are a lot of listeners just starting out with this stuff and you pick them up right at the beginning, to lead them further on.

The 3V3 are sorted out by Mike, so let me comment on the "speaker". It's worth noting that whenever you say speaker, you actually mean "buzzer". The buzzer includes already some electronics to generate the tone, so we hear the beep. With a speaker (or headphone,...) on its own, you only will hear crackling sounds the moment you close or break the circuit. Due to the low resistance of the speaker coil, there can be a high current flowing, which might damage it. So when using a speaker, please add a series resistor or capacitor.

Regards,
Michael

Leave Comment

Note to Verbose Commenters
If you can't fit everything you want to say in the comment below then you really should record a response show instead.

Note to Spammers
All comments are moderated. All links are checked by humans. We strip out all html. Feel free to record a show about yourself, or your industry, or any other topic we may find interesting. We also check shows for spam :).

Provide feedback
Your Name/Handle:
Title:
Comment:
Anti Spam Question: What does the letter P in HPR stand for?
Are you a spammer?
Who is the host of this show?
What does HPR mean to you?